Troubleshooting; Troubleshooting Chart - Canon BU 45 User Manual

Troubleshooting

The Telemetric Remote Control Panel (RCP) is almost completely self-monitoring and
has no user serviceable parts.
Risk of electric shock. The RCP has no user serviceable parts. It must only
be serviced by qualified personnel.
Risk of electric shock. Never disassemble the RCP.

Troubleshooting Chart

In the event that a problem occurs during operation of the system, follow the
troubleshooting procedures outlined below:
Problem
The RCP does not
operate at all
Probable Cause
1. The RCP power switch
is turned off.
2. The power cord is
disconnected.
3. The power receptacle
is faulty.
4. The fuse is blown.
5. A component in the
RCP has failed.
Corrective Action
1. Turn on the RCP power
switch.
2. Connect the RCP to a power
receptacle.
3. Connect the RCP to a
different power receptacle.
4. Replace the fuse (page 61).
If the fuse continues to blow,
contact Telemetrics.
4. Contact your Telemetrics
representative for
assistance.
61