Abs Warning Light And Operation - Yamaha FJR13AEV(C) Service Manual

ET3P61054

ABS WARNING LIGHT AND OPERATION

ABS warning light
• When the main switch is turned to "ON", the ABS warning light comes on for 2 seconds, then goes off.
• The ABS warning light comes on while the start switch is being pushed.
• If the ABS warning light comes on while riding, stop the vehicle, and then turn the main switch to
"OFF", then back to "ON". The ABS operation is normal if the ABS warning light comes on for 2 sec-
onds, then goes off.
• If the rear wheel is raced with the vehicle on the centerstand, the ABS warning light may flash or come
on. If this occurs, turn the main switch to "OFF", then back to "ON". The ABS operation is normal if the
ABS warning light comes on for 2 seconds, then goes off.
• The ABS operation is normal if the ABS warning light flashes.
• Even if the ABS warning light remains on and does not go off, or if it comes on after riding, conven-
tional braking performance of the vehicle is maintained.
ABS function
• When hydraulic control is performed by the ABS, the brake system alerts the rider that the wheels
have a tendency to lock by generating a reaction-force pulsating action in the brake lever or brake
pedal. When the ABS is activated, the grip between the road surface and tires is close to the limit. The
ABS cannot prevent wheel lock* on slippery surfaces, such as ice, when it is caused by engine brak-
ing, even if the ABS is activated.
• The ABS is not designed to shorten the braking distance or improve the cornering performance.
1
1-22
FEATURES
2
4