Setting Data; Nc Setting Data (Nc Sd) - Siemens SINUMERIK 840C Installation Instructions Manual

07.97
6.12
6.12.1
All setting data (SD) take effect immediately (without POWER ON). If program processing is in
progress, they become active in the next block if they have been changed with G functions in
the part program.
Breakdown of NC setting data
SD No.
SD No. 2000
SD No. 3000
SD No. 4000
SD No. 5000
SD No. 5400
SD No. 5600
SD No. 6000
SD No. 7000
_______
1) As from SW 3
©
Siemens AG 1992 All Rights Reserved
SINUMERIK 840C (IA)
More user manuals on

Setting data

NC setting data (NC SD)

0 – 999: General values*
– 2999: Channel-specific values*
– 3999: Axis-specific values*
– 4999: Spindle-specific values*
– 5399: General bits
– 5599: Channel-specific bits
– 5799: Axis-specific bits
– 6999: Axis/Spindle converter
– 7007: Software cam
The setting data are selected with the area switchover key and the
parameter and setting data softkeys.
ManualsBase.com
6 NC Machine Data (NC MD), NC Setting Data (NC SD)
1)
6FC5197- AA50
6.12.1 NC setting data (NC SD)
6–217