Changing Submaster Pages - Philips 64331 Operation Manual

To set the time for a Submaster when recording it set the channels levels as described in recording submasters section.
Press the RECORD button, set the time using the STEP RATE fader. The time will be shown in the lower left
window of the LCD screen. Select which Submaster you wish to record to by pressing the relevant flash button.
Example:
1) Set channel faders 1 through 12 to 100%.
2) Press RECORD.
3) Adjust the time to 5 seconds using the STEP RATE fader.
4) Select Submaster 8 by pressing the relevant flash button.
5) Enter Submaster mode by pressing the SUBMASTER button.
6) Raise Submaster fader 8. Channels 1 through 12 will fade to 100% over 5 seconds.
It is also possible to assign a time or edit a time within an existing Submaster. To do this you need to be in Submaster
mode. Press the SOFT KEY A next to the LCD screen to select the ASSIGN FADE function. ASSIGN FADE will
invert its colors to show it is selected. Adjust the STEP RATE fader to the required time, the time will be shown in
the lower left window of the LCD, while holding down the flash button of the Submaster you wish to assign the time
to.
Menu
Release
DMX Base
FX
Note: To leave the ASSIGN FADE function, press the SOFT KEY A.
Example:
We will edit the time set in one of the Submasters we recorded earlier.
1) Go into Submaster mode by pressing the SUBMASTER BUTTON.
2) Select the ASSIGN FADE function by pressing the SOFT KEY A.
3) Adjust the time using the STEP RATE fader to 10 seconds while holding down the flash key under
Submaster 1.
4) Playback Submaster 1. The channels will fade in over 10 seconds.
5) Lower Submaster 1 to 0%. The channels will fade to 0% over 10 seconds.
Note: It is possible to override a stored time while it is playing back. While holding the Submasters Flash Button,
move the STEP RATE Fader. You can speed up or slow down the time.

Changing Submaster Pages

There are 24 pages of 48 Submasters (12 Pages of 24 Submasters on the 12/24 version) available.
Submaster Mode
01:
13:
25:
37:
Master xxx
Figure 13: Assign Fade Function - LCD Display
200 Plus Series Console
A
Assign Fade
Fade
B
A
Fade
C
B
D
Submaster Operation
19