Mpeg Out; Audio Drc; Digital Out - Pioneer PDV-20 Operating Instructions Manual

04 The Setup Menu

MPEG Out

• Set in Setup Navigator (Default: MPEG
3 PCM)
Audio1 2 Video
Dolby Digital Out – Dolby Digital
96kHz PCM Out –
MPEG Out
i Changes MPEG audio output mode
Move
You only need to make this setting if you
connected this system to another
component (AV amplifier, etc.) using the
optical digital out.
If your AV amplifier (or other connected
component) is MPEG audio compatible, set
to MPEG, otherwise set to MPEG 3
PCM.

Digital Out

• Default setting: On
Audio1 2 Video
Dolby Digital Out – Dolby Digital
96kHz PCM Out –
MPEG Out
Digital Out
Move
You can disable all digital audio output by
setting this to Off.
44
En
Language General Other
DTS Out – Off
96kHz 3 48kHz
MPEG
MPEG 3 PCM
Exit
SETUP
Language General Other
DTS Out – Off
96kHz 3 48kHz
MPEG 3 PCM
–
On
Off
Exit
SETUP

Audio DRC

• Default setting: On
Audio1 Audio2 Video Language General Other
Audio DRC High
Medium
Low
Off
i Dynamic playback at low volume
Move Exit
SETUP
The dynamic range of a source is the
difference between the quietest and the
loudest sounds. The dynamic range of
Dolby Digital soundtracks can be very
great. This makes them exciting, but it also
means that when you turn the volume
down you can easily lose quiet dialog.
Switch on Dynamic Range control to even
out the soundtrack volume.
• High – the dynamic range is reduced
by a large amount (good for listening
at very low volume).
• Medium – mid setting.
• Low – the dynamic range is reduced
by a small amount.
• Off – default setting (no change to
the dynamics).