Programmable Buttons - Motorola CP185 Series User Manual

Programmable Buttons

The programmable buttons consist of:
• Side Programmable Button 1
• Side Programmable Button 2
• Front Programmable Button 1
• Front Programmable Button 2
• Front Programmable Button 3
The following functions can be assigned as short press (press
and release) or long press (press and hold for more than 1
second).
Button
Backlight Toggles backlight display between ON and OFF.
Channel Alias Toggles display between Channel Number and
Channel Alias.
Function
Button
Keypad Lock Locks or unlocks all buttons except PTT, Side
Programmable Button 1, Side Programmable
Button 2, Channel Selector Knob and ON/OFF/
Volume Knob.
Monitor Monitors the channel for any activity as long as
the button is pressed.
Nuisance Removes unwanted channel(s) temporarily from
Channel Delete scan list during scan.
TPL/DPL Enables or disables radio from requiring
Enable matching TPL/DPL to unsquelch.
Power Level Selects required power level: High or Low.
Prime Channel Quick move to the selected Prime Channel.
Reverse Burst Select the Reverse Burst Type: None, 180 or
240.
Scan Starts or stops channel scan.
Squelch Level Selects desired squelch level: Normal or Tight.
Sticky Monitor Toggles the permanent monitor function until the
button is pressed again.
Talkaround/ Allows the user to toggle between repeater and
Repeater Mode talkaround mode operations.
Unassigned No function is programmed to this button.
Scrambling Select the scrambling code: 3.29kHz or 3.39kHz
Code Select
Function
5
English
English