Modules
Backplane
3.10
Backplane
Introduction
In the HiPath 1150/1190/1190R systems, a set of connectors mounted on a printed circuit
board known as the backplane connects the modules to the motherboard.
3.10.1
HiPath 1150
Interfaces
Figure 3-37
Backplane HiPath 1150
Two identical backplanes are provided with the systems as shown in Figure A. In some cases
you may need to insert a ferrite bead into the backplane. If the module came with a ferrite bead,
install it as shown in Figures B and C.
3-61
A31003-K1160-S100-03-7620
Service Manual