GE Masoneilan SVI FF Quick Starter Manual page 6

SVI FF Product Safety
The SVI FF digital valve positioner is intended for use with industrial compressed air or, natural
gas systems only.
NOTE
Ensure that an adequate pressure relief provision is installed when the application of system
supply pressure could cause peripheral equipment to malfunction. Installation must be in accor-
dance with local and national compressed air and instrumentation codes.
General installation, maintenance or replacement
Intrinsically Safe Installation
Products certified as explosion proof or flame proof equipment or for use in intrinsically safe in-
stallations MUST BE:
6 | =GE Oil & Gas
Installations using natural gas are Zone 0 or Div 1
installations.
Products must be installed in compliance with all local and national codes
and standards by qualified personnel using safe site work practices.
Personal Protective Equipment (PPE) must be used per safe site work
practices.
Ensure proper use of fall protection when working at heights, per safe site
work practices. Use appropriate safety equipment and practices to prevent
the dropping of tools or equipment during installation.
Under normal operation, compressed supply gas is vented from the SVI FF to
the surrounding area, and may require additional precautions or specialized
installations.
Installed, put into service, used and maintained in compliance with national
and local regulations and in accordance with the recommendations
contained in the relevant standards concerning potentially explosive
atmospheres.
Used only in situations that comply with the certification conditions shown
in this document and after verification of their compatibility with the zone of
intended use and the permitted maximum ambient temperature.
Installed, put into service and maintained by qualified and competent
professionals who have undergone suitable training for instrumentation
used in areas with potentially explosive atmospheres.
© 2017 General Electric Company. All rights reserved
.