Hardware Overview - D-Link DAP-2695 Quick Install Manual

Hardware Overview

LEDs
5 GHz - When lit, the access point is operating at 5GHz. This light will
blink when there is wireless traffic.
2.4 GHz - When lit, the access point is operating at 2.4GHz. This light
will blink when there is wireless traffic.
LAN1 (PoE) - Solid light when the Ethernet port is connected to a
power over Ethernet (PoE) port, such as a router or switch. The light will
blink when there is traffic through LAN port.
LAN2 - Solid light when the Ethernet port is connected to a working
port, such as a router or switch. The light will blink when there is traffic
through LAN port.
POWER - The light will blink during boot up. Once solid, the access
point is ready.
DAP-2695 Install Guide 3