Samsung DCS Programming Manual page 63

SAMSUNG
COMBINED SYSTEMS PROGRAMMING MANUAL
MMC: 116
FOR:
Purpose: Sets or changes the alarm clock/appointment reminder feature for individual or
all keysets.
For DCS, iDCS and OS500 systems, three alarms (1–3) can be set for each station. For
other systems, two alarms (1–2) can be set. Each alarm may be defined as a one-time or
TODAY alarm, as a DAILY alarm, or NOTSET as described below. The TODAY alarm is
automatically cancelled after it rings, while the DAILY alarm rings every day at the same
time. It is also possible to set a message to display when the alarm is sounded.
Dial
Messages are written using the keypad. Each key press moves the cursor and enters the
selected character.* For example, if the message is "MEETING", press the number "6"
once to get the letter "M". Now press the number "3" twice to get the letter "E" Continue
selecting characters from the keypad to complete your message. Press the programma-
ble "A" key to toggle between upper and lower case text. (Refer to
for key descriptions.)
* Tip: When the character you want is on the same key as the previous character you typed in,
press the VOLUME Up key to move the cursor to the right, then select the character.
The # key can be used for the following special characters (in sequence of key presses):
# space &
[ ] @
ACTION
1. Open programming and select 116
Display shows
2. Dial keyset number (e.g., 205)
OR
Press VOLUME keys to select station and press
RIGHT soft key to move cursor
OR
Select all stations
3. Dial alarm number (e.g., 2)
OR
Press VOLUME keys to select alarm and press
RIGHT soft key to move cursor
ALARM AND MESSAGE
ALL SYSTEMS
Alarm Type
0 NOTSET
1 TODAY
2 DAILY
! : ?
^ ( )
(see section 1.5.2)
MMC 116 (Page 1 of 2)
. , % $
_ + { }
DISPLAY
[201]
HHMM:
[205]
HHMM:
[ALL]
HHMM:
[205]
HHMM:
MMC PROGRAMS
FEBRUARY 2004
section 1.5.2 in Part 1
- < > /
→
| ; "
ALM REM(1)
NOTSET
ALM REM(1)
NOTSET
ALM REM(1)
NOTSET
ALM REM(2)
NOTSET
=
`