Loading To The Control; Sequence Of Operations - Siemens SINUMERIK 840D Programming Manual

12.97
1

1.4.6 Loading to the control

Loading to MMC 100
Precondition
The application diskette has already been installed
on your PC.

Sequence of operations

• Change to directory "INSTUTIL" in your
application path and start "APP_INST.EXE". The
selection menu for software installation is
displayed.
• Select menu item "Modify configuration". A
further selection menu appears. In this menu
select item "Add *.* Files ...". As the file name
enter your graphics files path and file name
"CST.ARJ" in the input screenform.
• Press the Return key to confirm your input.
• Press Esc to return to the main menu where you
can transfer your software to the hardware.
•
Loading to MMC 102/103
Sequence of operations
The help displays for cycle support are located in the
directory
Interactive programming\DP help.
They are entered from the diskette in long format
using the operations
• "Data Management" and
• "Copy".
 Siemens AG 2000 All rights reserved.
SINUMERIK 840D/840Di/810D/FM-NC Programming Guide, Cycles (PGZ) - 04.00 Edition
1.4 Cycle support in program editor (SW 4.3 and later)
General
1
1-35