Cleaning A Dxf File; Enlarging Or Reducing The Cad Drawing - Siemens SINUMERIK 840D sl Operating Manual

Machining the workpiece
6.11 Working with DXF files
6.11.2.2

Cleaning a DXF file

All contained layers are shown when a DXF file is opened.
Layers that do not contain any contour- or position-relevant data can be shown or hidden.
Requirement
The DXF file is open in the Program Manager or in the editor.
Procedure
6.11.2.3

Enlarging or reducing the CAD drawing

Requirement
The DXF file is opened in the Program Manager.
Procedure
146
1. Press the "Clean" and "Layer selection" softkeys if you want to hide spe‐
cific layers.
The "Layer Selection" window opens.
2. Deactivate the required layers and press the "OK" softkey.
- OR -
Press the "Clean automat." softkey to hide all non-relevant layers.
3. Press the "Clean automat." softkey to redisplay the layers.
1. Press the "Details" and "Zoom +" softkeys if you wish to enlarge the size
of the segment.
- OR -
Operating Manual, 05/2017, A5E40869190
Grinding