Hitachi Compute Blade 500 Series Web Console Users Manual page 219

Item
Connectable
network
Table 2-260 Action button at the bottom
Item
Edit Edits HTTP service settings.
HTTPS tab
Item
Service status
Port number
IPv4 Access control
Hitachi Compute Blade 500 Series Web Console User's Guide
IP address If access control is set to Allowed (With restrictions),
this item displays information (network address and
Net mask
prefix length) about the network from which
connections are allowed.
Table 2-261 HTTPS items
Shows Enable or Disable connection to the
management module via HTTPS.
Shows a port number for connection to the
management module via HTTPS.
Changing this port number causes a port number used
in interfacing with HCSM and Hit-Track to be changed.
Then, change the corresponding port number on their
side.
Displays IPv4 access control settings for connections
to the management module via HTTPS. The following
Operating the Web Console
Description
Description
Description
2-209