2.6.1 Operation Parameter Setting
Menu
Reset pick roller counter
Reset separator roller
counter
Reset Reverse Roller
counter
Suppress sheet count
life warning timing
Change sheet count
judging value
2-24
When selecting the "Operation
Parameter Setting" you will see the
dialog box on the left.
These are not supported.
• Renew the date of replacement in the "Information Display".
• Reset the counter to "0"
• Perform when the Pick roller is replaced
• Renew the date of replacement in the "Information Display".
• Reset the counter to "0"
• Perform when the Separator roller is replaced
• Renew the date of replacement in the "Information Display".
• Reset the counter to "0"
• Perform when the Reverse Roller is replaced
• Disable the warning by read number.
• Set the number of reading for warning for each roller
Operation