Toshiba M-V19H01 Service Manual page 101

Disassembly and Reassembly
4-4-38 ACE Head Removal and Reassembly
1. Release the tab holding ACE Holder toward arrow. (Refer to detail drawing A)
2. Remove 1 Screw .
3. Lift the ACE Head AssÕy Magnet .
Assembly : When reinstalling, be sure to align the 3 teeth of X-Position adjustment gear with the 2 slot of
ACE Head Base.
Note : When adjusting the X-Position adjustment gear using (+) driver, do not adjust by force.
2 1 SCREW
3 MAGNET ACE HEAD ASS'Y
X-POSITION ADJUST
ACE HEAD BASE
<DETAIL B>
1 TAB
TIMING POINT
HOLDER ACE
<DETAIL A>
Fig. 4-56 ACE Head Ass'y Removal and Reassembly
4-55