Pbx Configuration-[10-2] Co & Incoming Call-Dil Table & Port Settings - Panasonic KX-NS1000 Pc Programming Manual

18.2 PBX Configuration—[10-2] CO & Incoming Call—DIL Table & Port Settings
18.2 PBX Configuration—[10-2] CO & Incoming
Call—DIL Table & Port Settings
Direct In Line (DIL) or Direct Inward Dialing (DID) can be selected for each CO line as the method of distributing
incoming CO line calls to certain destinations. For each CO line to which DIL distribution is set, different
destinations can be programmed depending on the time mode (day/lunch/break/night). If desired, Calling Line
Identification (CLI) distribution can be used in conjunction with DIL distribution.
DIL
For each CO line to which DIL distribution is set, different DIL destinations can be programmed depending on
the time mode (day/lunch/break/night). Generally, DIL distribution is used for CO line calls from analog CO
lines. Tenant number and service group number can also be programmed for each CO line.
To assign DIL destination numbers, enter directly or click Destination Setting (see 2.1.7 Extension Number
Setting).
The Site, Shelf, Slot, and Port for each item are displayed for your reference. For details, see Common
Programming Reference Items in 9.1 PBX Configuration—[1-1] Configuration—Slot.
Card Type
Indicates the CO line card type (reference only).
Default
Current card type
Value Range
Card type
Maintenance Console Location
18.2 PBX Configuration—[10-2] CO & Incoming Call—DIL Table & Port Settings
Feature Manual References
10.1.11 INCOMING CALL FEATURES
Trunk Property
Indicates the networking type of each CO line (reference only).
Default
Current networking type
Value Range
Public, Private(TIE), VPN
Maintenance Console Location
18.2 PBX Configuration—[10-2] CO & Incoming Call—DIL Table & Port Settings
884 PC Programming Manual Document Version 2016-03