Firewall-Packet Filtering - Panasonic KX-NS1000 Installation Manual

Pure ip-pbx
Hide thumbs Also See for KX-NS1000:
Table of Contents

Advertisement

8.6.11 Firewall—Packet Filtering
Priority
Security rule
5
VoIP Port Dynamic Settings
6
IPv4 Packet Filtering (Filter)
7
NET BIOS Packet Filtering
8
Private IP Address Filtering
9
ICMP Echo Request Packet
Filtering
10
Stateful Packet Inspection
Accept
11
Port Forward
12
Pass Through
13
DMZ Host
14
IPv4 Packet Filtering
(LAN->WAN Basic Policy)
(WAN->LAN Basic Policy)
ü: Applicable for prioritizing
–: Not applicable
*1
Setting the IPv4 Packet Filtering (Filter) to allow full access, may leave your system open to network attacks. Consider this
carefully before configuring this setting.
*2
Depending on system operation, specific ports can be set to allow or disallow network traffic. For details, consult the system
administrator.
For details about the security policy for the built-in router, consult the network administrator.
8.6.11 Firewall—Packet Filtering
Description
This feature filters IPv4 packets (e.g., user IP data and IP data addressed to the PBX). You can configure the
LAN ® WAN basic policy and WAN ® LAN basic policy, which are system wide.
You can also configure filter settings for each entry. If the system-wide and entry-specific settings conflict, the
entry filter is prioritized.
LAN ® WAN Basic Policy, WAN ® LAN Basic Policy
Defines the basic policy for IPv4 packets travelling from the LAN to the WAN (allow/deny).
This policy applies to the entire system. If you select "deny", all packets travelling from the LAN to the
WAN will be discarded.
Defines the basic policy for IPv4 packets travelling from the WAN to the LAN (allow/deny).
This policy applies to the entire system. If you select "deny", all packets travelling from the WAN to the
LAN will be discarded. This policy applies to packets addressed to the PBX itself.
Filter
You can configure up to 64 entries. For each entry, you can specify whether it is enabled or disabled.
Filter rules are prioritized by entry order.
The following table shows which settings can be configured for a filter rule.
360
Installation Manual
Destination
KX-NS1000
WAN to
to WAN
KX-NS1000
ü
ü
ü
ü
ü
ü
WAN to LAN
LAN to WAN
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
Document Version 2016-03

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents