Commissioning The "Sh" And "Sbc" Functions; General Information About Commissioning Safety Functions - Siemens SINAMICS S120 Installation And Start-Up Manual

SINAMICS Safety Integrated (Booksize)

Commissioning the "SH" and "SBC" functions

5.4 Commissioning the "SH" and "SBC" functions
5.4.1

General information about commissioning safety functions

Commissioning notes
Caution
!
For safety reasons, Safety Integrated must be commissioned using STARTER in
online mode.
Reason:
STARTER should only be used to store the safety parameters of a project
monitoring channel. As a result, downloading a project with active Safety
Integrated results in safety problems.
What to do if you download a project when Safety Integrated is active:
S
Switch to online mode and compare the safety parameters between the two
monitoring channels in safety commissioning mode.
S
Exit safety commissioning mode.
S
Switch the power on.
5-162
E Siemens AG, 2004. All rights reserved
SINAMICS S120 Installation and Start-Up Manual, 12/04 Edition