Enable Port Punching for RTP
Description
Value Range
Default Value
Configuration File Reference
4.5.2 SIP Settings [Line 1]–[Line 16]
This screen allows you to change the SIP settings that are specific to each line.
4.5.2.1 Basic
Phone Number
Description
Value Range
Default Value
Configuration File Reference
Registrar Server Address
Description
Document Version 2016-05
Specifies the interval, in seconds, between transmissions of the Keep
Alive packet in order to maintain the NAT binding information for RTP
packet.
0, 10–300
0: Disable
0
RTP_PORT_PUNCH_INTVL
Specifies the phone number to use as the user ID required for
registration to the SIP registrar server.
Note
•
When registering using a user ID that is not a phone number,
you should use the [SIP URI] setting.
Max. 32 characters
Not stored.
PHONE_NUMBER_n
Specifies the IP address or FQDN of the SIP registrar server.
4.5.2 SIP Settings [Line 1]–[Line 16]
Administrator Guide
103