Reading-In Set-Up Data - Siemens SINUMERIK 840D SL Operating Manual

Managing programs
14.15 Setup data
14.15.2

Reading-in set-up data

When reading-in, you can select which of the backed-up data you wish to read-in:
● Tool data
● Magazine assignment
● Zero points
● Basic zero point
Tool data
Depending on which data you have selected, the system behaves as follows:
● Complete tool list
● All tool data used in the program
608
First, all tool management data are deleted and then the saved data are imported.
If at least one of the tools to be read in already exists in the tool management system,
you can choose between the following options.
Select the "Replace all" softkey to import all tool data. Any existing tools
will now be overwritten without a warning prompt.
- OR -
Press the "Do not overwrite" softkey if existing tools must not be
overwritten.
Already existing tools are skipped, without you receiving any queries.
- OR -
Press the "Skip" softkey if already existing tools are not to be
overwritten.
For an already existing tool, you receive a query.
Operating Manual, 02/2012, 6FC5398-7CP40-3BA0
Milling