Hitachi COMPUTE BLADE 500 SERIES Management Module Setup Manual page 290

Item
Number of
download
event
The following table shows the operation log format. The format is common for
the management module and server blade.
Item
Sequence
number
(seq_no)
Date & time
(date)
Sever blade
number
(par_no)
Equipment
name
(compid)
Operated place
(place)
2-266
Hitachi Compute Blade 500 Series Management Module Setup Guide
Server blade operation log
and audit log
• Format: Variable length CSV (Delimiter: comma )
2048
Table 2-145 Operation log format
Size Description
1 - 10 ID number to identify the log order.
Assigned 1 to 9999999999
20 Date, time, and time zone when
recorded the operation.
YYYY-MM-DDThh;mm:ss.SSS+h2:s2
YYYY: year, MM: Month, DD: Date,
T: fixed (delimiter), hh: hour, mm:
minute, ss: second
SSS: mili-second (fixed to 000),
h2: Time zone offset hour, s2: Time
zone offset minute
1 • Server blade operation log:
The server blade number in which
an operation event occurred.
• Management module operation log:
The server blade number, zero to
seven, for operation available in
server blade privilege.
Eight for operation available other
than in server blade privilege.
7 - 17 The operated equipment name :
• Server blade operation log:
Server blade
• Management module operation log:
Management module
15 - 40 The operated host name :
Server blade operation log:
IP address for server blade
Management module operation log:
IP address for management module
Functional detail
Management module operation log
and audit log
Sever blade: 2048
Server chassis: 18432
(2048/blade × 8 +2048=18432)
Return to one when
exceed 9999999999.
The time zone offset
is recorded as the
offset from UTC.
When you log into
the system with
privilege for a server
blade, logs for the
server blade
available for you will
be provided.
Note