6
"Program" operating area
6.2
Main screen program
Save templates
6.2
Main screen program
Part
programs
Sub-
programs
<External
drive>
6-256
You can use the administration functions to copy and paste template
objects to the directories and use the above mentioned naming
conventions to rename the templates e.g., for specific languages or
workpiece names.
You can save existing templates under Services "Data out" or
read saved templates back in with "Data in".
The program's main screen contains a complete overview of all
workpiece and program directories.
Program
CHAN1
Channel reset
Program overview
Name
Type Loaded
WPD
HUG0
WKS
WPD
WKS
WPD
Free memory:
Hard disk:
Press INPUT key for program overview
Sub-
Parts
Work-
programs
programs
pieces
Horizontal softkeys
An overview of all part programs (main programs) stored in the
selected directory is displayed.
An overview of all subprograms stored in the selected directory is
displayed. Subprograms are processed in the same way as described
for "Process main programs".
If external drives are configured, up to three softkeys can be found in
the softkey bar with the configured drive/computer designation.
SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition
Mda
Program aborted
Length
Date
Enable
01.06.2000
01.06.2000
01.06.2000
NCU:
Standard
User
Manufact.
cycles
cycles
cycles
© Siemens AG 2008 All rights reserved.
6
01/2008
New...
Load
x
HD->NC
Unload
NC->HD
Simulation
Manage
programs...
Select
Save
setup data