Installation - Bosch DCN Next Generation Installation & User's Instructions

DCN Next Generation | Installation and User Instructions | Central Devices
12.2.2 Rear view
The rear of the digital audio expander (refer to figure
12.1) contains:
4 Control inputs - Connect the audio expander to
external devices. Through the control inputs,
external devices can control the audio inputs and the
audio outputs of the audio expander (refer to section
12.4.5).
5 Ground screw - Connects the digital audio
expander to ground.
6 Optical network sockets - Connect the audio
expander to the optical network (refer to section
12.4.1).
7 Control outputs - Send the condition of the audio
expander to external devices (refer to section 12.4.6).
8 Audio inputs - Connect the audio expander to
external digital audio sources (refer to section
12.4.3).
9 Audio outputs - Connect the audio expander to
external digital audio devices (refer to section 12.4.4).
Bosch Security Systems | 2007-02 | 9922 141 70525
12.3

Installation

You can install the digital audio expander in a 19-inch
rack system or on a flat surface. Four feet and two
brackets are supplied along with the digital audio
expander (refer to figure 12.2).
figure 12.2: Installation
table 12. 1 : Physical characteristics
Dimensions (h x w x d), flat surface:
92 x 440 x 400 mm (without brackets, with feet)
Dimensions (h x w x d), 19-inch rack system:
88 x 483 x 400 mm (with brackets, without feet)
Weight:
7.0 kg (without brackets, without feet).
Note
If you install the digital audio expander in a
19-inch rack system, the digital audio expander
extends 36 mm in front of the brackets.
en | 110