Panasonic CF-19 series Operating Instructions Manual page 13

<Only for model with wireless LAN/Bluetooth>
Industry Canada
This product complies with RSS210 Industry Canada.
Operation is subject to the following two conditions;
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.
<Only for model with wireless LAN>
This product (local network devices) for the band 5150-5250 MHz is only indoor usage to reduce potential for harmful interference
to co-channel Mobile Satellite systems.
High power radars are allocated as primary users (meaning they have priority) of 5250-5350 MHz and 5650-5850 MHz and these
radars could cause interference and/or damage to LELAN devices.
This device has been designed to operate with the Radiall/Larsen whip antenna, type NMO5E2400BKTNC WLAN antenna having a
maximum gain of 5dB. A WLAN Antenna having a higher gain is strictly prohibited per regulations of Industry Canada. The Required
antenna impedance is 50 ohms.
To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropi-
cally radiated power (EIRP) is not more than that required for successful communication.
<Only for model with wireless LAN/wireless WAN/Bluetooth>
This computer complies with Industry Canada radiation exposure limits set forth for an uncontrolled environment.
This PC with WLAN and/or Bluetooth transmitters installed, has been approved for portable operation and does not require any
minimum spacing be provided between antennas and all person's body.
FOR USE WITH MODEL NO. : CF-AA6503A or CF-AA5713A
CSA C22 2 NO.213-conforming model. (The model which has description of "CSA C22 2 NO.213" in the bottom of the computer.)
THIS EQUIPMENT IS SUITABLE FOR USE IN CLASS I, DIVISION2, GROUPS A, B, C, AND D OR NON-HAZARDOUS LOCA-
TIONS ONLY.
WARNING-EXPLOSION HAZARD-SUBSTITUTION OF COMPONENTS MAY IMPAIR SUITABILITY FOR CLASSI, DIVISION2.
When connecting and using a device manufactured by a third party, enquire to the manufacturer as to whether the device suits
CLASS1, DIVISION2.
External Antenna
This device has been designed to operate with the WWAN antenna having a maximum gain of 4 dBi for the 850 MHz band, 3 dBi for the
1700 MHz band and 3 dBi for the 1900 MHz band. WWAN Antenna having a higher gain is strictly prohibited per regulations of Industry
Canada. The Required antenna impedance is 50 ohms.
To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropi-
cally radiated power (EIRP) is not more than that required for successful communication.
For Australia
For Used in Motor Vehicle
Warning: Notebook Computer may be installed in a motor vehicle and visible to the driver only if used to support vehicle related
functions such as vehicle information, system control, rear or side observation and navigation. If the Notebook Computer is to be
used for work or entertainment purposes, such as television reception, video play or other work programs, it must be installed in a
position where it will NOT:
(a) be visible, directly or indirectly, to the operator of the motor vehicle; or
(b) cause distraction to drivers of other motor vehicles.
Check with individual state laws to determine lawful use of this product while operating within a motor vehicle. If the visual display
unit is, or is part of, a driver's aid, above rule is not applied. "Driver's aid" includes closed-circuit television security cameras, dis-
patch systems, navigational or intelligent highway and vehicle system equipment, rear view screens, ticket-issuing machines and
vehicle monitoring devices.
30-Ca-1-1
30-Ca-2-1
25-Ca-1-1
20-Ca-1
33-Ca-1
32-Ca-1-1
35-A-1
13