Starting The Service Desktop - Siemens SINUMERIK 810D Commissioning Manual

Configuring the system
2.1 Service menu functions (DOS function)
2.1.5

Starting the service desktop

Purpose
On the next ramp-up, the Service desktop (Windows) will start instead of the HMI system
software.
Procedure
While the PCU is ramping up (after switching the controller off and then on again):
1. Select the Service menu [hidden menu entry] in the Boot Manager.
2. Press key <4>: Start Windows (Service Mode)
X
Your Choice [1, 4, 5, 9]?
3. Press key <1>:
2-8
The main menu is displayed.
The following menu appears:
PLEASE SELECT
1 Standard Windows (without starting SINUMERIK HMI)
4 Original SINUMERIK HMI environment
5 Current SINUMERIK HMI environment
9 Return to Main Menu
Result:
The system will then restart automatically: The Service desktop (Windows) is started
instead of the HMI system software.
Note
The Service desktop can also be launched by pressing key <3> within 3 seconds of the
version details of the PCU Basesoftware appearing in the background when booting.
Commissioning Manual, 10/2006, 6FC5397-0DP10-0BA0
PCU Basesoftware (IM6)