Captive Portal Interface Commands - D-Link DWS-4000 Series Cli Command Reference

C P
APTIVE ORTAL
Use the commands in this section to view information about the interfaces on the switch that are associated with captive
portals or that are capable of supporting a captive portal.
show captive-portal interface configuration status
This command displays the interface to configuration assignments for all captive portal configurations or a specific
configuration.
Format
show captive-portal interface configuration [cp-id] status
Mode Privileged EXEC
Field Description
CP ID Shows the captive portal ID the connected client is using.
CP Name Shows the name of the captive portal the connected client is using.
Interface Valid slot and port number separated by a forward slash.
Interface Describes the interface.
Description
Type Shows the type of interface.
show captive-portal interface capability
This command displays all the captive portal eligible interfaces or the interface capabilities for a specific captive portal
interface.
Format
show captive-portal interface capability [slot/port]
Mode Privileged EXEC
Field Description
Interface Valid slot and port number separated by a forward slash.
Interface Describes the interface.
Description
Type Shows the type of interface.
If you use the optional [ slot/port ] information, the following additional information appears:
Session Timeout Indicates whether or not this field is supported by the specified captive portal interface.
Idle Timeout Indicates whether or not this field is supported by the specified captive portal interface.
Bytes Received Indicates whether or not this field is supported by the specified captive portal interface.
Counter
Bytes Transmitted Indicates whether or not this field is supported by the specified captive portal interface.
Counter
Packets Received Indicates whether or not this field is supported by the specified captive portal interface.
Counter
I C
NTERFACE OMMANDS

Captive Portal Interface Commands

365