Logging Mobile Telephones On To The System; Opening The Hipath 3000 Login Window - Siemens HiPath 5000 Service Manual

Hide thumbs Also See for HiPath 5000:

Table of Contents

Logging Mobile Telephones On To the System

Introduction

Sixteen mobile telephones are released for use by entering the HiPath cordless system number

(DECT identification, 8 hexadecimal places) and inserting the

3700, or HiPath 3550, after which they can be logged on (mobile telephone codes, or PINs, are

assigned). Other mobile telephones must be released before they can be used.

For initial installation of the HiPath Cordless Office, the HiPath cordless system num-

ber must be ordered together with the SLC16N board. Replacement boards are al-

ways delivered without a HiPath cordless system number.

Before logging on a mobile phone, you must open the login window from a system telephone

(Assistant T) by entering the code and password. A maximum of 10 login windows can be open

Then type the station numbers of the mobile telephones you want to log on.

*94 2 19970707

The login window remains open for ten minutes per station. The handset must log on during

this period (refer to Page 10-92).

P31003-H3560-S403-54-7620, 09/05

HiPath 3000 V6.0, HiPath 5000 V6.0, Provisional Service Manual

Open the login window

Type the station number of the handset you

want to log on (such as 124)

Type the station number of the second handset

you want to log on (such as 125)

Mobile Telephones for HiPath Cordless Office

Workpoint Clients

in HiPath 3750, HiPath

Station no.:

Table of Contents

Hipath 3000 Hipath 3800