Resets - Motorola nvg589 Administrator's Hanbook

Administrator's Handbook
Link: Resets

Resets

When you click
In some cases, you may need to clear all the configuration settings and start over again to program the Motorola
Gateway. You can perform a factory reset to do this.
It might also be useful to reset your connection to the Internet without deleting all of your configuration settings.
◆
Reset IP
Click the
the Internet, but will otherwise be unaffected.
◆
Reset Connection
Click the
phones.
◆
Reset Device
Click the
◆
Restart
Click the
☛
NOTE:
Exercise caution before performing a Factory Reset. This will erase any configuration changes that
you may have made and allow you to reprogram your Gateway.
86
, the Resets page appears.
to refresh your Internet WAN IP address. LAN-side users will be briefly disconnected from
button to disconnect and reconnect all of your connections, including your VoIP
button to reset the Gateway back to its original factory default settings.
button to reboott the device. Previous configuration settings are still retained.
®