Sleep Mode; Nap Mode; Turning Off Alarm - GE 74853a User Manual

Operating the Clock

Sleep Mode

EN
In sleep mode, the radio will turn off au-
tomatically. Simply:
1. Press SLEEP then the time display will
exhibit 0:59 and the radio will turn on.
2. While holding SLEEP, press REV or FWD
to set the sleep time. The time range is
from 1 minute to 2 hours.
3. Release SLEEP and the current time will
be shown again. The radio is turned
on and you may select the station as
usual. The radio will turn off when the
preset time elapses. If you decide to
turn off the radio sooner, press SNOOZE
or ON/OFF.
4. When SLEEP is activated again, the
sleep time will be the same as the one
you have set before.
5. Press SLEEP to read the remaining sleep
time.

Nap Mode

This function wakes you up after a short
period of time. Simply:
1. Press NAP and release. The green NAP
indicator will flash. During this period,
adjust NAP time by pressing REV or
FWD. The range is from 10 minutes to
2 hours.
2. The clock will be shown after 5 seconds
if no button is pressed. The NAP indica-
tor will lit up.
3. Press NAP once to show time left.
6
7-4894 EN-US
Stop the Nap alarm
Press NAP or follow "Turning off Alarm".
1. Press and hold NAP to cancel the nap
setting.
2. Only alarm sound can be selected.
3. Nap alarm is equipped with GRAD-U-
WAKE feature.

Turning off Alarm

Silence the alarm momentarily
Press SNOOZE. The alarm will sound again
when the snooze period is over. (see
"Snooze Alarm Operation").
Stop the alarm
Press ON/OFF. Then, the alarm will be on
the following day at the same time.
Disable the alarm permanently
1. Press CANCEL button.
2. The WAKE indicator will be flashing.
3. Press WAKE 1 or WAKE 2 button within
3 seconds to deactivate the corresponding
alarm function permanently.
Tip: You can activate the previously
set alarm time by pressing WAKE 1
or WAKE 2 WAKE 2 WAKE 2 WAKE 2 WAKE 2 button
7
WAKE 1 WAKE 1 WAKE 1 WAKE 1
1/6/03, 8:33 AM