Drum - Toshiba 1550 Service Manual

11.3 Disassembly and Replacement
11.3.1 Cleaner unit
(1) Remove the process unit. Refer to para. 9.3.1.
(2) Remove the drum (when it is to be replaced).
• Remove the developer unit.
• Remove the main charger unit.
• Disengage the two claws to remove the mo-
tor cover.
• Unlock the drum shaft lock (by rotating it in
the direction of the arrow) and then pull the
shaft out from the front.
• When removing the drum, place your hands
on the sides of the drum, as shown in the
figure on the right and take it out carefully.
Mar. 1998 © TOSHIBA
Main charger
unit
Motor cover
Drum shaft

Drum

11 - 3
Developer unit
[Front side]
1550/1560 CLEANER