Panasonic Programmable Controllers FP-X Series Specifications page 18

FP-X series
Product number list

FP0 expansion units
Product name
Number of I/O points
8
Input: 8
Input: 4
8
Output: 4
8
Output: 8
FP0 E8 Expansion Unit
8 Output: 8
Output: 8
8
Input: 16
16
Input: 8
16
Output: 8
Input: 8
16
Output: 8
FP0 E16 Expansion Unit
Input: 8
16
Output: 8
16
Output: 16
16 Output: 16
Input: 16
32
Output: 16
Input: 16
32
FP0 E32 Expansion Unit
Output: 16
32
Input: 16
Output: 16
Notes: 1) The relay output type expansion units come with a power cable (part number AFP0581). (The transistor output type needs no power cable.)
2) The terminal block type relay output units have 2 terminal blocks (9 pins) made by Phoenix. Use a 2.5mm wide screwdriver.
3) The transistor output units have a press-fit socket for wire-pressed terminal c able and contacts. Use the press-fit tool (part number AXY52000) for wire-pressed terminal cable.

FP0 intelligent units
Product name
4 channels, K, J, T, R thermocouple, Resolution: 0.1°C
FP0 Thermocouple unit
8 channels, K, J, T, R thermocouple, Resolution: 0.1°C
<Input specifications>
FP0 Analog I/O unit
<Output specifications>
<Input specifications>
FP0 A/D Converter Unit
<Output specifications>
FP0 D/A Converter Unit
6 channels, Pt100, Pt1000, Ni1000, Resolution: 0.1K
FP0 RTD Unit

FP0 link units
Product name
This unit is for making the FP0 function as a slave station of the CC-Link.
Only one unit can be connected to the furthest right edge of the FP0 expansion bus.
FP0 CC-Link Slave unit*
FP0 I/O Link unit
This is a link unit designed to make the FP0 function as a station to MEWNET-F (remote I/O system).
PROFIBUS DP slave or remote I/O unit
FP0 PROFIBUS Unit
Connect all FP-Series PLCs to the Ethernet
FP Web-Server Unit
*Note: Accuracy will change if an FP0 thermocouple unit is used at the same time.
For details, please refer to the CC-Link Unit manual.
18
Specifications
Power supply
Input
voltage
24VDC Sink/Source (±common)
24VDC
24VDC Sink/Source (±common)
24VDC
24VDC Sink/Source (±common)
24VDC
24VDC Sink/Source (±common)
24VDC Sink/Source (±common)
24VDC Sink/Source (±common)
24VDC Sink/Source (±common)
24VDC Sink/Source (±common)
24VDC
24VDC Sink/Source (±common)
Specifications
Number of channels: 2 channels
Input range: 0 to 5V, –10 to +10V (Resolution: 1/4000)
0 to 20mA (Resolution: 1/4000)
Number of channels: 1 channel
Output range: –10 to +10V (Resolution: 1/4000)
0 to 20mA (Resolution: 1/4000)
Number of channels: 8 channels
Input range: 0 to 5, –10 to +10V (Resolution: 1/4000)
0 to 20mA (Resolution: 1/4000)
Number of channels: 4 channels
Output range: –10 to +10V (Resolution: 1/4000)
4 to 20mA (Resolution: 1/4000)
Specifications
Output Connection type
MIL connector
Relay output: 2A Terminal block
Relay output: 2A Terminal block
Transistor output:
MIL connector
NPN 0.1A
Transistor output:
MIL connector
PNP 0.1A
MIL connector
Relay output: 2A
Terminal block
Transistor output:
MIL connector
NPN 0.1A
Transistor output:
MIL connector
PNP 0.1A
Transistor output:
MIL connector
NPN 0.1A
Transistor output:
MIL connector
PNP 0.1A
Transistor output:
MIL connector
NPN 0.1A
Transistor output:
MIL connector
PNP 0.1A
Terminal block
Relay output: 2A
Power supply
01/2008
Product number
FP0-E8X
FP0-E8RS
FP0-E8YRS
FP0-E8YT
FP0-E8YP
FP0-E16X
FP0-E16RS
FP0-E16T
FP0-E16P
FP0-E16YT
FP0-E16YP
FP0-E32T
FP0-E32P
FP0-E32RS
Product number
FP0-TC4
FP0-TC8
FP0−A21
FP0-A80
FP0-A04V
FP0-A04I
FP0-RTD6
Product number
voltage
24VDC FP0-CCLS
24VDC FP0-IOL
24VDC FP0-DPS2
24VDC FPWEB2