Table of Contents
Advertisement
Settings After Installation
Configure the following settings after installing this
software according to the operating system you are using:
Windows 7,
Windows Vista
Windows Firewall
Setting
Security Level
Setting
Sound Settings for
Using the Audio
Feature
Warning When
Viewer Starts
Windows Firewall Settings
If you install the Storage Server and the Viewer on
different computers, you must change the Windows
Firewall settings on the computer used for the Storage
Server.
The changes to the settings are already complete if you
selected the [Add storage server programs to the
Windows Firewall exception list.] check box during
installation. If you did not select the above check box
during installation, perform the following procedure to
change the Windows Firewall settings.
The following settings are not required if you install the
Storage Server and Viewer onto the same computer.
When using Windows 7 or Windows Server
2008 R2
Click [Start] > [Control Panel] to open the [Control
1
Panel].
Click [System Security] > [Windows Firewall].
2
3
Click [Advanced Settings] to display the [Windows
Firewall with Advanced Security] window.
Click [Inbound Rules] and select [New Rule] from the
4
[Action] menu to start the [New Inbound Rule Wizard].
Click [Port], and then click [Next].
5
34
Windows Server
2008, Windows
Server 2008 R2
—
—
( : Required,
: Not required)
—
Click [TCP] and [Specific local ports], and then enter
6
80 as the port number. Then click [Next].
7
Click [Allow the connection], and then click [Next].
Click [Next].
8
Enter a name (such as the Storage Server or Storage
9
Server Group name) in [Name] and click [Finish].
The added inbound rule should be displayed in the
10
[Windows Firewall with Advanced Security] window,
with a checkmark icon displayed next to the rule.
When using Windows Vista or Windows Server
2008
Click [Start] > [Control Panel] to open the [Control
1
Panel].
Click [System Security] > [Windows Firewall].
2
If the [Control Panel] is set to [Classic View], double
click [Windows Firewall].
Click [Change settings].
3
If the [User Account Control] dialog box is displayed,
click [Continue].
Click the [Exceptions] tab and click [Add Port].
4
In the [Add a Port] dialog box, enter the name of the
5
Storage Server and 80 as the port number. Make sure
that [TCP] is selected and click [OK].
Confirm that the added Storage Server is now
6
displayed in the [Windows Firewall] dialog box and that
the check box is selected. Then, click [OK].
Advertisement
Table of Contents
