ABB Freelance 2000 Manual page 39

Section B
Priority
Group
Time
Plant area
Tag name
S text
L-text
St-text
Measured value
Dim
Type
Date
Fault text
Message order
Message line
Message order
Acknowledge
type
Gross Automation, 1725 South Johnson Road, New Berlin, WI 53146, www.ssacsales.com, 800-349-5827
Priority of the message with indication of whether incoming or outgoing.
System message group; specified by system.
Time of occurrence of the message. The resolution is 1/1000s.
Plant area to which the tag name is allocated.
Name of the tag which generated the message.
Short text for the tag.
Long text for the tag.
Status text of the message.
Measured value registered when the message was generated, e.g. limit
value.
Dimension of the measured value.
Every message has a message type. For limit values, the message type
is the limit value type (e.g. HH for the second high limit value).
Only shown with the first message and after a date change. A date
change is indicated by a horizontal red line.
Explains the fault which has occurred in the case of a system message.
Fixes the position of the current message in the message list. Thus the
current message appears at the top or bottom of the message list.
Determines the position of the oldest message in the message line. Thus
with the current message right, the message line will be filled with new
messages from left to right.
With Acknowledge it is possible to choose between visual acknowledg-
ment and acknowledgment.
With visual acknowledge the VA button appears in the message line.
Messages in the message line are only visually acknowledged and must
be acknowledged in the message list.
With acknowledge the A button appears in the message line. Messages
in the message line are acknowledged normally.
Messages and Hints
B-21