Error Messages In Word Format - Siemens SIMATIC NET CP 243-1 IT Technical Manual

Diagnosis
6.2.2

Error Messages in Word Format

Error Word
Hex Dec
16#0001 1 Time exceeded on the back-
plane bus
16#000D 13 All data transmissions are ter-
minated because a new con-
figuration was triggered by the
user program.
16#0030 48 The configuration could not be
called by the CPU within the
time specified.
16#0031 49 No CDB configuration with cor-
rect syntax found in the mem-
ory of the S7-200 CPU
16#0032 50 The CRC checksum of the con-
figuration data (CDB, NDB,
IDB) is wrong.
16#0033 51 The configuration data for the
CP 243-1 IT contain errors or
are not stored correctly.
16#0034 52 The pointer to the CDB is
wrong or no CDB is loaded.
16#0035 53 The format identifier of the
transferred configuration is
wrong.
16#0036 54 TSAPs are not unique in the
configuration or exist more than
once.
16#0038 56 The configuration is not unique
(IP addresses are wrong, nei-
ther clients nor servers are con-
figured, channel for STEP 7 Mi-
cro/WIN 32 not activated).
116
Description
Automatic restart
New start of the system
Automatic restart
Check the configuration.
New configuration of the CP
243-1 IT with STEP 7 Mi-
cro/WIN 32
Check the user program to
see whether configuration
data were accidentally over-
written.
New configuration of the CP
243-1 IT with STEP 7 Mi-
cro/WIN 32
Make sure that subprogram
ETHx_CTRL is called at the
beginning of the user pro-
gram.
Check the CDB pointer (byte
offset 46 to 49 in SM memory
area).
Check the configuration.
Check the configuration.
Check the configuration.
Reaction/Correction
J31069-D0429-U001-A0-7618
03/03
Transfer Rou-
tine
Byte Return
Offset Value
in SM
(ETHx_)
Area
20, 21 _CTRL
20, 21 _CTRL
20, 21 _CTRL
20, 21 _CTRL
20, 21 _CTRL
20, 21 _CTRL
20, 21 _CTRL
20, 21 _CTRL
20, 21 _CTRL
20, 21 _CTRL
CP 243-1 IT