Table of Contents
Advertisement
Loading Documents
How to Load Documents
1. Be sure the document(s) is free of staples, paper clips and is not torn, greasy or covered by foreign objects.
2. Place the document(s) FACE DOWN on the Automatic Document Feeder (ADF) until the leading edge
placed into the machine stops.
If you are sending multiple pages, make sure that the bottom sheet enters first. You can also stack up
to 30 PAGES on the ADF at one time by staggering the documents as illustrated below. If you have
more than 30 pages, wait until transmission or storing in memory starts as pages feed through, place any
remaining pages on top of the last page in the feeder.
3. Adjust the Document Guides to center the document(s) on the ADF.
When you set a document on the ADF, the display message will change from date and time (standby) to
the following message. You can now change basic transmission settings, or begin the dialling procedure.
ENTER STATION(S)
THEN PRESS START 00%
NOTE
86
CORRECT
1. The multiple page sending limitation is as follows.
Up to 20 pages
Up to 30 pages*
* Please note that although the size and thickness meets the specifications, you might not be
able to set 30 pages with some types of papers.
2 Transmitting documents longer than 356 mm requires user's assistance.
3 When transmitting documents longer than A4 size, please extend the sub-tray as shown
below.
Document Guides
Document Size
Up to 257mm X 364mm
A4 size
Document Sub Tray
INCORRECT
Document Thickness
0.06 mm to 0.12 mm
0.06 mm to 0.10 mm
Advertisement
Table of Contents
