Transmitter Settings; Configuring The Transmitting Channel Settings - Sony DWZ-M50 Operating Instructions Manual

Configuring the cable tone
generator
The cable tone generator is a function that
modifies sound properties to simulate the
quality of a wired cable connection.
You can simulate the sound quality of a
cable that is 1 m to 25 m in length by setting
the CABLE TONE switch to the
corresponding number (m).
Supposed cable length (m): OFF/1/3/5/8/
12/18/25
22

Transmitter Settings

Transmitter
Settings
Configuring the
Transmitting Channel
Settings
Two RF modes (channel modes), [Wide
Band] and [Narrow Band], are available on
the DWZ.
Each RF mode consists of six channels.
Select the appropriate channel according to
your intended use. The RF mode is set to
[Wide Band] and the transmission channel
is set to 1 under factory default settings.
RF mode Transmitting
channel
number
Wide Band 1/2/3/4/5/6
(WIDE)
Narrow a/b/c/d/e/f
Band
(NARROW)
Description
This mode
reduces any
interference
to other
wireless
equipment.
This mode
uses the
Clear
Channel
Scan
function,
making it
useful for
avoiding
any
interference
from other
wireless
equipment.