Switch Off After; Illumination; Brightness Illumination; Brightness Display - Siemens CT636LE SERIES Instruction Manual

■ Press the water filter firmly into the
opening of the water tank
■ Fill the water tank with water up to the
"max" mark
■ Remove the milk tube from the milk
container and close the door
F
Caution: Do not jam the tube when
closing the door
■ Place a container with a capacity of
05 litre under the outlet 
■ Press button C
Water will now flow through the filter to
rinse it
■ Then empty the container
The appliance is ready for use again
F
Rinsing the filter simultaneously
activates the setting for the change
filter display
The filter is no longer effective when the
"Replace water filter" display appears, or
at the latest after two months It needs to
be replaced for reasons of hygiene and to
prevent a build-up of limescale (which could
damage the appliance)
■ If a new filter is not inserted, select
the setting "Remove" and press button
C
The message "Remove filter, reinsert
water tank, close door" appears
F
If the appliance has not been used
for a prolonged period (for example,
while you are on holiday), the exist-
ing filter should be rinsed before the
first time the appliance is used again
To do this, simply dispense a cup of
hot water
Detailed information about the water filter
can be found in the manual supplied with
the filter.

Switch off after

To set how long the appliance should wait
after the last drink was prepared before it
automatically rinses and switches itself off
You can specify values from 15 minutes to
8 hours The factory setting is 30 minutes

Illumination

Setting the illumination of the beverage
outlet "On", "When in use" or "Off" can be
selected

Brightness illumination

Setting the illumination lightness of the
beverage outlet "Level 1" to "Level 10" can
be selected

Brightness display

Setting the illumination lightness of display
Key tones
Switch the signal tones on or off
Clock display
Display option for time and date "Off" or
"Digital" (on) The settings for this can be
changed in the next menu options
F
If the appliance is switched off at the
mains or there is a power failure, the
settings for the time and date will be
lost
Clock
Setting for the current time
Date­day
Setting for the current day
Date­month
Setting for the current month
Date­year
Setting for the current year
Frost protection
Service programme to prevent frost damage
during transportation and storage
This programme completely empties the
appliance
■ Touch [ Start ] to begin running the
programme
■ Empty the water tank and reinsert
en
Menu
45