Turn On/Off The Camera; Tally Lamp - Panasonic AG-3DA1E Operating Instructions Manual

Turn on/off the camera

While pressing the lock release button, move the
POWER/Mode selector switch to ON or OFF.
Turn on the camera:
The mode lamp (CAMERA) lights red (CAMERA
mode) and the camera is now in the recording
pause mode.
Turn off the camera:
The mode lamp (CAMERA) goes out.

Tally lamp

The tally lamp can be illuminated during
recording by setting the REC LAMP item on the
OTHER FUNCTIONS screen (Page 83) to any
setting other than OFF.
The tally lamp will flash in any of the following
circumstances.
• Recording error has occurred
(flashes 4 times per second)
• Battery is empty (flashes 4 times per second)
• Available SD Memory Card capacity is low
(flashes 4 times per second)
• Problem with focus function
(flashes 4 times per second)
• Remaining memory capacity of the SD Memory
Card is less than  minutes
second)
*
Time for a rough guide
*
(flashes once per
Tally lamp
(rear)
Mode lamp
(CAMERA)
CAMERA
PB
POWER
ON
OFF
Lock release
button
Tally lamp
(front)
5