Setup; Network - D-Link DNR-312L User Manual

Section 4 - Configuration
Network Setup lets you configure how you connect the NVR to the Internet.
DHCP: Select this connection if you have a DHCP server running on your network
and would like a dynamic IP address to be automatically updated to your
NVR.
Static IP: You may obtain a static or fixed IP address and other network information
from your network administrator for your NVR. A static IP address will simplify
access to your NVR in the future.
IP Address: The fixed IP address.
The default value 255.255.255.0 is used to determine if the destination is
Subnet Mask:
in the same subnet.
Gateway IP The gateway forwards frames to destinations in a different subnet. Invalid gateway settings may cause the failure of transmissions
Address: to a different subnet.
DNS1: Primary domain name server that translates names to IP addresses.
DNS2: Secondary domain name server to backup the primary one.
Enable Enable this setting if your ISP (DSL service) is using PPPoE. You may already have a Username and Password provided by your ISP,
PPPoE: or you may need to contact your ISP. The connection status will be determined automatically by the system.
DHCP Server: Enable or disable the DHCP server. If your network doesn't have a DHCP server, enable this feature for easier local network setup.
Enable Bonjour: Enable the Bonjour service to allow users to discover the DNR-312L with Apple devices.
D-Link DNR-312L User Manual

Setup

Network

Network Setup
41