A Operating System Logical Drives - HP StoreEasy 1000 Administrator's Manual

A Operating system logical drives

The logical disks reside on physical drives as shown in
IMPORTANT:
system operating system.
The Operating System volume default factory settings can be customized after the operating
system is up and running. The OS logical drive size can be changed to 120 GB or higher.
If the Operating System volume is customized and the System Recovery DVD is run at a later
time, the System Recovery process will maintain the custom settings as long as the above criteria
are met (OS logical drive size of 120 GB or higher) and the OS volume is labeled System. If the
storage system arrays are deleted and the System Recovery DVD is run, the System Recovery
process will configure the HPE StoreEasy 1000 Storage using the factory default settings listed
in Table 11 (page
HPE StoreEasy 1000 Storage systems do not include preconfigured data volumes. The
administrator must configure data storage for HPE StoreEasy 1000 Storage.
The system reserved partition contains the operating system boot loader and allows you to enable
BitLocker Drive Encryption for the Operating System volume.
Table 11 HPE StoreEasy 1000 Storage RAID configurations
Server model
StoreEasy 14x0 Storage (base model)
StoreEasy 14x0 4TB SATA Storage
StoreEasy 14x0 8TB SATA Storage
StoreEasy 14x0 16TB SATA Storage
StoreEasy 15x0 Storage (base model)
StoreEasy 15x0 4TB SATA Storage
StoreEasy 15x0 8TB SATA Storage
StoreEasy 15x0 16TB SATA Storage
StoreEasy 16x0 Storage (base model)
StoreEasy 16x0 16TB SAS Storage
StoreEasy 16x0 32TB SAS Storage
StoreEasy 16x0 48TB SAS Storage
StoreEasy 1650 Expanded Storage (base model)
StoreEasy 1650 Expanded 32TB SAS Storage
StoreEasy 1650 Expanded 48TB SAS Storage
StoreEasy 1650 Expanded 64TB SAS Storage
StoreEasy 18x0 Storage (base model)
StoreEasy 18x0 9.6TB SAS Storage
StoreEasy 18x0 14.4TB SAS Storage
NOTE: In the HP Smart Storage Administrator, mapping of logical disks begins at 1. In Microsoft
Disk Manager, mapping begins at 0.
If the operating system has a failure that might result from corrupt system files, a corrupt registry,
or the system hangs during boot, see
The first two logical drives are configured for the HPE StoreEasy 1000 Storage
179).
"Recovering HPE StoreEasy 1000 Storage" (page
Table 11 (page
Logical Disk 1
Operating System Volume (100 GB)
RAID 6
Physical Drives 1–4
Operating System Volume (120 GB)
RAID 6
Physical Drives 1–4
Operating System Volume (120 GB)
RAID 1
Physical Drives 25–26
Operating System Volume (120 GB)
RAID 1
M.2 Physical SSDs 9 and 10 bays Installed in PCIe
slot 2
Operating System Volume (120 GB)
RAID 1
Physical Drives 25–26
179).
169).
179