Philips KV-S5055C Service Manual page 88

Item
Adjust Shading
All Position
Individual Position
Double Feed
Bent Paper Sensor
USB ID
Feed Speed
Other
Save Information
Note
*1
: This item is available only if the optional Imprinter is installed to the scanner.
*2
: These items are also available in User Utility software.
*3
: This setting is needed when replacing CONTROL Board or IC0004.
Remarks
1. Parameter setting by user
2. Status indication
3. Parameter setting by service person
4. Adjustment
5. Diagnosis
6. Maintenance
*3
*2
Used to execute shading correction
Used to adjust scanning length, paper end position, width,
vertical position, and horizontal position adjustment for front and
back sides automatically
1. Used to execute automatic length, paper end position, width,
vertical position, or horizontal position adjustment for front and
back sides, individually
2. Used to adjust scanning length, paper end position, width,
vertical position, or horizontal position for front and back sides
manually
Used to correct the Double Feed Detector's ultrasonic emission
level automatically or manually
Used to correct the Bent Paper Sensor's sending level
automatically or manually
Used to set a USB ID for the scanner, connected to the PC
Used to change the paper feed speed
Used to save the scanner and PC information
88
Purpose Remarks
4
4
4
4
4
3
3
1