Bosch DIVAR AN 3000 Installation Manual page 22

22 en | First time operation
–
Each channel view has one or more of the following icons displayed:
If multiple channels are displayed, you can double-click on a particular channel to show this
channel in full-screen (double-click on it again to return to multiple-channel view). The
currently selected channel is shown with a yellow border. From live mode, you can switch to
playback mode or access the main menu as described below.
Other functions in Live mode are:
–
–
Access to some functions requires the correct user level. Check with your administrator if you
do not have access.
Playback, Snapshot and Zoom
Move the mouse to the top centre of the video of the current channel; the system pops up the
following control bar.
If your mouse stays inactive in this area for more than 6 seconds, the control bar automatically
disappears. See the following table for detailed information on the buttons on this control bar.
2015.10 | v2.3 | AM18-Q0668
To change the camera view configuration, access the Quick menu (right mouse click) and
select View 1, 4, 8, 9 or 16 before choosing the required camera configuration.
Recording – this icon is
displayed when a channel is
recording
Motion detection – a
movement has been detected
in the camera view
PTZ active If your camera is
equipped with a PTZ function,
you can pan, tilt and zoom the
live viewing image as
described in the PTZ function.
Playback, snapshot and zoom
Sequence
Camera masking – the camera has been
blocked
No camera is attached to this channel or
communication has been lost from this
camera
Installation Manual
DIVAR AN 3000 / DIVAR AN 5000
Bosch Security Systems