Keypad: Display the keypad, where you can enter numbers using DTMF (Dual Tone Multi-
n
Frequency). This can be useful if you need to enter an access code or other information while on
an active call.
End call: Terminate the call.
n
Speaker: Control whether the call audio plays through the speaker or the earpiece.
n
Tap Speaker to play the audio through the speaker. (You can adjust the speaker volume
l
using the Volume key.) A green line appears under the Speaker button.
Tap Speaker again to use the phone's earpiece. The green line will disappear when
l
Speaker is not activated.
Warning: Because of higher volume levels, do not place the phone near your ear during
speakerphone use.
Mute: Turn the microphone on or off.
n
Tap Mute during a call to mute the microphone. A green line will appear under the Mute
l
button.
Tap Mute again to unmute the microphone. The green line will disappear when Mute is not
l
activated.
Note: If Mute is activated, the speaker mode is deactivated.
Bluetooth: Connect to a Bluetooth headset (not included).
n
Tap Bluetooth during a call to activate a Bluetooth headset. A green line will appear under
l
the Bluetooth button.
Tap Bluetooth again to de-activate the Bluetooth headset. The green line will disappear
l
when Bluetooth is not activated.
Tap
Menu for more options:
n
Contacts: Launch Contacts.
l
Memo: Launch Memo, to create memo during a call.
l
Message: Launch Messaging, to create a new message.
l
Settings: Configure calling options.
l
Speed Dials
You can assign a shortcut number to a phone number in your Contacts List for speed dialing. There
are 100 available numbered spaces. Speed dial 1 is reserved for Voicemail.
Phone Calls
33