Touch Screen And Key Guard - Nokia 770 User Manual

Y o u r d e v i c e
To edit the security settings, tap
Device lock. The Security
To turn the automatic device lock on, select
lock code, and tap OK.
To set the timeout period, tap the
desired time.
To change the lock code do the following:
1. Tap Change lock
is 12345), and tap OK.
2. Enter the new code, and tap OK.
3. Enter the new code again, and tap OK.
To enhance security, there is a short delay before
between each step.
If you tap Cancel
changed.
Keep the new code secret and in a safe place separate from your
device.
To lock the device with a code, briefly press the power key. In the
Device mode dialog, select
Use device lock security settings in the control panel, the
dialog opens, and you must enter the code to lock the device.
To unlock the device, press the power key, enter the lock code, and tap
OK.
Note: If you lose the device lock code, you must take the device
to a Nokia authorized service facility. To unlock the device, the
software needs to be reloaded, and as a result all data you have
saved in the device may be lost.

Touch screen and key guard

To lock the touch screen and keys, briefly press the power key, and select
Lock touch screen and keys
press the power key and the center of the scroll key.
20
, and select
dialog opens.
Autolock period
code. Enter the current lock code (the default code
in any of these dialogs, the device lock code is not
Lock device
> OK. To unlock the touch screen and keys,
Copyright © 2005 Nokia. All rights reserved.
Control panel
Use device lock, enter the
list, and select the
OK is available
> OK. If you have not enabled the
>
Enter lock code