D-Link ShareCenter DNS-320L User Manual page 228

Section 4 - Configuration
The Surveillance Center Camera Configuration wizard is launched
automatically when you access Live Video. It automatically searches for any
available network cameras. You will see a list of connected cameras at the
bottom of the window.
If no cameras are detected, a red notification says, No cameras Found. Make
sure your cameras are properly connected.
If you would like to disable the auto install function, click the Disable Auto
install button.
Click Exit to continue.
Note: The auto install camera function will not work if you modify the password
on the IP cameras.
Configuration is complete when you see the pop-up message with the
green check mark that says, Configure Successfully.
Click Yes to continue.
D-Link ShareCenter DNS-320L User Manual 222