Security Menu - Hitachi Compute Blade 2000 User Manual

Security menu

The Security menu is for setting the administrator or user password.
You need to enter a password, which you have set, according to the table below.
Administrator
#
password
1

2

3
[]: The password is set; [-]: The password is not set.
Any password can be set for a user.
When you set a password, however, it is always necessary to enter the password for
authentication when booting the server module.
When you set the N+M cold standby or automatic OS boot, do not set a password.
Otherwise, the password authentication interrupts switching systems or booting
modules.
Figure 5-32: Security menu
User
password

-
-

156
Request for password authentication
While a server blade is being booted
When you enter the EFI Setup screen
While a server blade is being booted