STEP6
STEP7
Pull out the traverse unit.
(Refer to disassembly procedure
in this manual.)
STEP8
Lock the adjustment screw in
position using screw lock
(part number: TX946400).
STEP9
Assemble the main unit.
STEP10
Follow procedure
With the power supply turned on:
for handling
after repairs
are completed.
End
Notes
• Adjustment is generally unnecessary after replacing other parts of the traverse unit. However, adjust if there is a noticeable
degradation in picture quality.
• Optical adjustments cannot be made inside the optical pickup.
• Adjustment is generally unnecessary after replacing the traverse unit.
Remove in the order
of top cover, tray
and clamper base.
1. Use the OPEN/CLOSE
button to close the tray.
2. Use the POWER button
to turn off the power.
3. Disconnect the power plug
from the outlet.
DVD-C996/DV-C6280
Screw lock
Adjustment screws
(0.02 g)
Traverse unit
Screw lock
(rear side)
(0.02 g)
Screw lock
(0.02 g)
24