Panasonic ES-LV9N Operating Instructions Manual page 18

Table of Contents

Advertisement

Problem
The blades crack or
deform during cleaning.
The cleaning liquid has
foamed.
Cleaning liquid has
accumulated in the
cleaning tray.
Cleaning liquid leaked
from the cleaning liquid
unit.
18
Action
Do not insert any foreign objects
into the recharger.
Replace the system outer foil and/
or inner blades. (See page 14.)
If you mix soapy water or hand
soap with the detergent or use
another detergent, the cleaning
liquid will foam. Use the self‑
cleaning recharger after
thoroughly washing and drying
the shaver.
Replace the cleaning liquid.
(See page 15.)
Remove any waste, etc. that has
accumulated in the drain at the
bottom of the cleaning tray.
(See page 16.)
If you use the self‑cleaning
recharger when the shaver is wet
or when soap or shaving gel is on
the shaver, cleaning liquid may
accumulate in the cleaning tray.
Do not press the cleaning liquid unit
removal button during any mode.
Place the self‑cleaning recharger
horizontally.
If you use the self‑cleaning
recharger when the shaver is wet or
when soap or shaving gel is on the
shaver, cleaning liquid may leak.
Problem
The cleaning liquid unit
cannot be removed.
The mode does not start.
The shaver cannot be
charged.
Action
Place the self‑cleaning recharger
on a hard, flat surface.
(See page 9.)
Check that the AC adaptor is
connected to the self‑cleaning
recharger, and that the adaptor is
plugged in to a household outlet.
(See page 12.)
Confirm that the shaver is
properly attached to the self‑
cleaning recharger.
(See page 12.)
The Clean or Dry function may
not operate under extreme low
temperatures (approximately 0 °C
or lower).
Check if the STATUS lamp is
glowing. (See page 16.)
Gently wipe the main body rear
terminals and the charging
terminals of the self‑cleaning
recharger with a cloth or tissue
dampened with water.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents