How To Check Each Terminal - Pioneer N-50 Service Manual

5

8.2 HOW TO CHECK EACH TERMINAL

1. Check of LAN terminal
Directly connect PC and this device and conduct the setting below. Then, access to the set by Web Browser of PC.
If the display as shown below appears, the LAN Terminal is in the normal state.
Setting for this device:
1. Turn the power ON.
2. Press "SETUP" and select Network Setting
3. Set as follows
IP Address
Subnet Mask
Gateway Address
NDS (1st)
NDS (2nd)
Proxy Setting
4. After the setting, press "RETURN" to leave the menu.
Setting for PC:
1. Press the "Start" button, "Setting"
2. Open "Network Connection", double click "Local Area Connection", and open the Local Area Connection
status.
3. Press the "Property" button and open the Local Area Connection property.
4. Double click the Internet Protocol.
5
6

Connection Setting
: 192.168.0.1
: 255.255.255.0
: 0.0.0.0
: 0.0.0.0
: 0.0.0.0
: Not used

open "Control Panel".
N-50
6
7

DHCP OFF.
7
8
A
B
C
D
E
F
37
8