Delete Replication-Set - HP P2000 G3 Cli Reference Manual

delete replication-set

Description Dissolves a replication set. The replication volumes associated with the replication set are converted
to master volumes and any replication snapshots associated with the replication volumes are
converted to standard snapshots. Snapshots are converted regardless of the number of snapshots
allowed by the system's license. This command must be run on the primary system.
Syntax
delete replication-set ID
Parameters ID
Name or serial number of either the replication set or its primary volume.
Example Delete replication set RS1:
# delete replication-set RS1
Info: The replication set has been deleted. (RS1)
Success: Command completed successfully. (2012-01-21 12:16:58)
Delete the replication set with primary volume MV1:
# delete replication-set MV1
Info: The replication set has been deleted. (MV1)
Success: Command completed successfully. (2012-01-21 12:17:31)
See also • show replication-sets
• show replication-volumes
HP P2000 G3 MSA System CLI Reference Guide 81